Kyle,

Touche' has a 26 gallon bladder tank under the aft seat of the dinette where 
the original fiberglass rigid tank was.  I have a ParMate pump and accumulator 
mounted just outboard of the tank in the same compartment.  There is a small 
strainer located there as well.

One creative spot for you to look at for additional tankage is to put a bladder 
tank between the hull and liner outboard of the hanging locker.

If I was to add a water heater, I would consider the round Isotemp Slim 15 
round water heater mounted under the shelf in the starboard cockpit locker.

Dennis C.
Touche' 35-1 #83
Mandeville, LA



>________________________________
> From: Kyle Mello <mavri...@gmail.com>
>To: cnc-list@cnc-list.com 
>Sent: Monday, May 20, 2013 1:35 PM
>Subject: Stus-List C&C 35 mk1 plumbing
> 
>
>
>I am hoping to gain some knowledge on the C&C 35 mk1 plumbing of fresh water 
>system. I would like to know where folks may have place additional water tanks 
>and what they best way to heat and pressurize the system would be. Currently 
>there is a smallish tank on the port side in space below the tables bench 
>seat. 
>
>
>Has anyone used a bladder in this boat and if so what size and where did they 
>locate it.  
>
>
>Thanks 
>
>
>-K
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to