After Touché was reprinted in 2010, I replaced the cove stripe with 3M automotive tape.
Prior to painting, I removed the old stripe with a 3M Stripe Off wheel. It had ragged edges but came off easily with the wheel. Dennis C. Touché 35-1 #83 Mandeville, LA Sent from my iPhone On May 1, 2013, at 7:27 PM, Bob Moriarty <bobmo...@gmail.com> wrote: > Speaking of boot stripes but a couple of feet higher, has anyone had > difficulty repainting their cove stripe, which on Ox is engraved and has > uneven edges? > > The first attempt I assigned to my son, hoping he'd become more detail > oriented. For the second attempt I used a 1/4"(?) roll of painters tape that > I circumscribed with a razor into two 1/8" rolls and tried it myself. > > It was difficult to tape a straight edge because it encompassed three > dimensions. I eventually settled on a compromise that is now unpleasant to > the eye. > > Bob M > Ox 33-1 > Jax, FL > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
