The notes on the Garmin cut sheet say to epoxy the tank to the hull. It's a 
confusing world!

Rich Knowles
Indigo. LF38
Halifax

On 2013-04-15, at 10:10, Bill Bina <billb...@sbcglobal.net> wrote:

The warning is to not use epoxy for gluing this specific "tank style" mount to 
the hull before filling it with mineral oil. That is very different than the 
application where you set a puck directly in a pool of epoxy. :-) 

Bill Bina


On 4/15/2013 9:02 AM, Pat Nevitt wrote:
> This is the one I used on my 29-2.  It has been in over 3 years now and never 
> skipped a beat.  I followed the installation guide that you see in the link 
> at the bottom of the page.  Note that it specifically says not to use epoxy.  
> I subsequently installed a through hull Tack Tick transducer in place of the 
> old data marine.  Fortunately my Garmin GPS allows you to select a different 
> frequency on the transducer shown in the link and I now have 2 depth finders 
> on the boat that don't conflict with one another.  I set one to water depth 
> and the other to depth under the keel.
> 
> Pat Nevitt
> 
> http://www.blueheronmarine.com/Airmar-P79-Fishfinder-Transducer-for-Garmin-6567

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to