Andy,

        Absolutely!  Thanks!

        
        All the best,

        Edd


        Edd M. Schillay
        Starship Enterprise
        C&C 37+ | Sail No: NCC-1701-B
        City Island, NY 
        Starship Enterprise's Captain's Log




On Mar 24, 2013, at 1:07 PM, Andrew Burton <a.burton.sai...@gmail.com> wrote:

You can often reuse the drive with a different controller. I think a friend may 
have one for sale if you can wait a couple of weeks for me to get back from a 
trip.
Andy
C&C 40
Peregrine

Andrew Burton
61 W Narragansett
Newport, RI 
USA    02840

http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260

On Mar 24, 2013, at 12:40 PM, Edd Schillay <e...@schillay.com> wrote:

> Josh,
> 
> I have the AP200DL with a hydraulic drive under the deck and a wired remote. 
> 
> The display is partially blacked out and two of the knobs just spin without 
> really engaging. 
> 
> There appears to be several things wrong with it. The last time I used it and 
> it worked was 2007. The next time I tried to use it was last September. 
> 
> So it's not something I would be using a whole lot. Just for those light air 
> days, under power, and going long distances. 
> 
> When there's breeze, I love being on the helm. Warp speed! 
> 
> 
> All the best,
> 
> Edd
> 
> -------------------------------
> Edd M. Schillay
> Starship Enterprise
> NCC-1701-B
> C&C 37+ | City Island, NY
> -------------------------------
> 914.332.4400  | Office
> 914.332.1671  | Fax
> 914.774.9767  | Mobile
> -------------------------------
> Sent via iPhone 5
> 
> On Mar 23, 2013, at 8:22 PM, Josh Muckley <muckl...@gmail.com> wrote:
> 
> Edd,
> 
> I believe mine might be similar to yours.  Do you have a j300x?  What is 
> wrong with it?  I'm interested in what I may have to look forward to 
> regarding repairs. 
> 
> I'm having the drive arm on mine re-machined to take out the slop.  I was 
> getting a lot of hunting and occasional 5° rudder deviation failures.  I 
> narrowed the problem down to a sloppy connection between the drive arm and 
> the drive piston.  Evidently the PO had used a 1/2" bit to sloppily drill a 
> 12mm hole.
> 
> I have heard that the wheel drives work but are kind of a cheap alternative 
> to "proper" under the deck autohelms.
> 
> Josh Muckley
> S/V Sea Hawk
> 
> --
> 
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to