Andy, Which varnish did you use?
On Wed, Mar 20, 2013 at 10:31 AM, Andrew Burton <a.burton.sai...@gmail.com>wrote: > I just finished mine. I went the palm sander with 150 for the first three > coats, then 180 for subsequent coats. Before the last coat I used 22 > sanding by hand with the grain to get the last of the sanding rings out and > laid a coat on top of that. I might do one more as I ended up with some > dust in it, but not really enough that anyone but me will notice. > Andy > C&C 40 > Peregrine > > On Wed, Mar 20, 2013 at 10:23 AM, Ron Kaye <ronkaye...@gmail.com> wrote: > >> Let me jump in here. What's the best way to scuff the sole and do it >> well in prep for 3 coats of <best stuff whatever>? 220 grit with a random >> orbital sander is what I typically do for household application or >> furniture refinishing. Good? I assume a flexible product like a sanding >> sponge for the corners and grooves and avoid steel wool? >> >> I don't want to use a chemical stripper. >> >> Are any water borne polys in the mix? I generally don't like the lack of >> depth in the appearance of the final product but might go that way for ease >> of application and periodic reapplication if it would hold up. >> >> Thoughts appreciated. >> >> >> Ron and Lisa >> 1986 35/3 >> To be renamed >> >> On Mar 20, 2013, at 1:48 PM, "djhaug...@juno.com" <djhaug...@juno.com> >> wrote: >> >> Yea, thats the idea. I want to get it looking better quickly so I can >> move in to other stuff! >> >> ---------- Original Message ---------- >> From: Andrew Burton <a.burton.sai...@gmail.com> >> To: cnc-list@cnc-list.com >> Subject: Re: Stus-List Interior Varnish >> Date: Wed, 20 Mar 2013 09:33:02 -0400 >> >> Danny, I'd scratch up the bare places and touch them up with sealer or >> really thin varnish. after that dried, I scuff the whole thing and apply a >> topcoat. That's if I just wanted to get some varnish on quick. >> Andy >> C&C 40 >> Peregrine >> >> On Wed, Mar 20, 2013 at 9:22 AM, djhaug...@juno.com >> <djhaug...@juno.com>wrote: >> >>> I need to touch up my interior varnish. >>> >>> I was planning to just scuff and coat. �There are some areas where the >>> varnish is completely worn through and others where it is in good shape. >>> �No real pealing. >>> >>> Will my skuff and coat plan work or am I being too optimistic? >>> >>> Danny >>> Lolita >>> 1973 Viking 33 >>> Westport Point, MA >>> >>> ---------- Original Message ---------- >>> From: Wally Bryant <w...@wbryant.com> >>> To: cnc-list@cnc-list.com >>> Subject: Re: Stus-List Interior Varnish >>> Date: Wed, 20 Mar 2013 03:35:52 +0000 >>> >>> Gary, I'm responding to your first question without listening to >>> others. �Take that for what it's worth. >>> >>> I have found MinWax Satin Finish Marine Varnish to be a very good >>> interior boat varnish for areas that are not subjected to 24x7 UV. >>> Really and seriously. �I wouldn't use it on the sole, but really believe >>> that is is a good interior varnish. >>> >>> Best regards, >>> Wal >>> >>> >>> Gary Russell wrote: >>> > I am about to refinish the teak on the interior of Expresso. �The >>> > question is, what varnish should I use ( Satin, gloss, Epiphanes, >>> MinWax, >>> > etc)?. �All suggestions appreciated. >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >>> >> >> >> >> -- >> Andrew Burton >> 61 W Narragansett Ave >> Newport, RI >> USA 02840 >> http://sites.google.com/site/andrewburtonyachtservices/ >> phone� +401 965 5260 >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> > > > -- > Andrew Burton > 61 W Narragansett Ave > Newport, RI > USA 02840 > http://sites.google.com/site/andrewburtonyachtservices/ > phone +401 965 5260 > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
