I recently purchased a Lewmar Standard Portlight roughly that size (Lewmar size #1). I am about 1/2 way through installing it and am pleased with the fit and finish. I used Lewmar's web site's excellent dimensional and installation information to make sure it would fit in the same place.
I bought it through West Marine after searching the interweb for suppliers. WM was offering 10% off and free shipping that week. The Lewmar portlight is replacing a very old Fuller Brush white plastic portlight that may have served well when new but after years of racing abuse it allowed water into the core. The leak was between the molded portlight pieces and not readily apparent. Martin Calypso 1970 C&C 43 Seattle -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dre...@gmail.com Sent: Friday, March 01, 2013 7:01 AM To: cnc-list@cnc-list.com Subject: Stus-List port replacement on 29Mk1 Dear List, I am looking to replace the small portlight in the aft end of the pilot birth on a 29mk1. It looks to be 6x13" in size. The current portlight has an protruding lip, and since the portlight external is in the cockpit, this lip has been stepped-on, broken, epoxied, and globbed to death. Are there any recommendations on which brand and model portlight one should use for a more flush-fitting functional access. Thanks for any advise. Paul - Paul E. 1979 C&C 29 Mk1 S/V Johanna Rose Carrabelle, FL _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com