Joel, I have the Adler Barbour system with a Danfoss compressor. I think mine is a 35 model, not sure. It works great. I have a fairly large freezer section. It has room for three trays of ice cubes and about 5-10 lbs of steaks/ribs. Current draw is supposedly around 5 amps. No issues, since we daysail most of the time. The compressor is in the port lazarette on a shelf that I built. There is some airflow in the locker, but it does get hot in there in the summer time. We always have cold beer though.
Jake Jake Brodersen C&C 35 Mk-III Midnight Mistress Hampton VA -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Sunday, February 17, 2013 10:49 AM To: cnc-list@cnc-list.com Subject: Stus-List refrigeration - icemaker? I'm looking at adding refrigeration to my ice box. I'm down to 2 choices - An Isotherm with a Danfoss 50 compressor and a flat cold plate or an Adler Barbour with the same compressor but with a plate that forms a small freezer/icemaker section (15 x 12 x 6 inches). The A/B is about $500 more. Do you make ice? If you can't, do you wish you could? Joel 35/3 Annapolis Sent from my iPad _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
