It would be difficult to use wind shifts to maximum advantage without the
aid of a good compass while racing.  Ded reckoning has become a last resort
on Alianna nowadays, since we carry a chart plotter and a backup chart
plotter but nonetheless electronics can let you down when you most need
them.paper charts and a good compass are "must have" items

 

Dwight Veinot

C&C 35 MKII, Alianna

Head of St. Margaret's Bay, NS

  _____  

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S
Sent: January 26, 2013 12:51 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Mounting chartplotter now Compass Deviation

 

I keep a portable VHF, binoculars, and portable GPS, in the drink and
binocular tray above the pedestal compass, and they don't seem to effect the
compass, maybe cause they are above it, and not on the same plain?  I use
the digital Autohelm for a compass and it's fairly close to the Sailcomp
Fluxgate we have.  I should double check.

Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ

  _____  

From: "Steve Thomas" <sthom...@sympatico.ca>
To: cnc-list@cnc-list.com
Sent: Friday, January 25, 2013 9:49:15 AM
Subject: Re: Stus-List Mounting chartplotter now Compass Deviation

I have found 2 small electronic items that had a powerful influence on the
compass - a hand held radio and a cell phone. The effect was particularly
bad when clipped on to a binoculars holder mounted in front of the binnacle.
That binoculars holder has held all kinds of things that affected the
compass and I am more careful with what I put in there now. Screwdrivers,
rigging knives, spare or spent AA cells, pliers, - all had measurable effect
and are now banned. Aluminum beer cans don't seem to be a problem and they
fit nicely.

 

I agree with all the comments about not worrying too much about your chart
plotter, so long as you take a thoughtful approach to the power leads and
test your set up.

 

-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Chris Ford
Sent: Friday, January 25, 2013 8:39 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Mounting chartplotter near magnetic compass
(ChrisFord)

Thanks all for your ideas on this one; your input will help me find a
work-around.  I guess the manufacturers' guidance is there for a reason,
even if the reason is CYA!   - Chris 


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2639/5556 - Release Date: 01/25/13

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to