Joel,
If you can, put some glass fiber on the edges. Epoxy has little strength. The
epoxy will split along the edges at the laminations and allow moisture to
enter. Put some tape on the top, epoxy on the glass then carefully sand the
excess.
Dennis C.
>________________________________
> From: Joel Aronson <joel.aron...@gmail.com>
>To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
>Sent: Sunday, December 23, 2012 8:48 AM
>Subject: Re: Stus-List underside of cabin sole
>
>
>Pat,
>
>
>It looks like the epoxy is the way to go on the edges and bottom of the
>plywood. I'll take that 105 off your hands. Let me know when it would be
>convenient to get together for a beer.
>
>Joel
>Sent from my iPad
>
>On Dec 22, 2012, at 5:21 PM, Pat Nevitt <pnev...@gmail.com> wrote:
>
>
>Joel,
>>
>>Not what I used on the boards, but I have a whole can of West 105 that is
>>yours if you want it. I used just a small amount when I drilled and filled
>>the holes for my new rope clutches.
>>
>>Pat
>>
>>
>>On Sat, Dec 22, 2012 at 5:17 PM, Pat Nevitt <pnev...@gmail.com> wrote:
>>
>>Joel,
>>>
>>>I used epoxy on mine. Did you ever look at the underside of the bilge cover
>>>on my boat? It's all epoxy.
>>>
>>>Pat
>>>
>>>
>>>
>>>On Sat, Dec 22, 2012 at 5:04 PM, Joel Aronson <joel.aron...@gmail.com> wrote:
>>>
>>>Well I took up a couple pieces of the cabin sole, and the underside
>>>>needs to be re-sealed. Some areas look like they have been damp for a
>>>>while, but they are not delaminated or spongy.
>>>>Can I use a marine primer or do I need to spend on West System stuff?
>>>>
>>>>Joel
>>>>Sent from my iPad
>>>>
>>>>_______________________________________________
>>>>This List is provided by the C&C Photo Album
>>>>http://www.cncphotoalbum.com
>>>>CnC-List@cnc-list.com
>>>>
>>>
>>
>_______________________________________________
>>This List is provided by the C&C Photo Album
>>http://www.cncphotoalbum.com
>>CnC-List@cnc-list.com
>>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
