I have done some repairs on my Awlgripped hull with International Perfection 2 part polyurethane, applied with an artist's brush. I was able to find a reasonably close color match off the shelf and I applied some with the brush, let it cure, then sanded lightly and reapplied to build up thickness. Not perfect but a lot better than deep scratches. Some year I will likely do the whole of the stern section because I now have some damage there which I consider too large for patching up.
Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Indigo Sent: November 17, 2012 4:19 PM To: Dennis C.; cnc-list@cnc-list.com Subject: Re: Stus-List 1981 Gel Coat Color Anyone got any tips on patching awl grip. I have a number of deep scratches and the bottom edge of the transom to repair. The awl grip was put on by a PO so I don't even know what its original color was. I see from the Awkgrip website that they offer patch-up quantities of a very limited range if colors. There is a blue (flag blue) but I have no idea if that matches closely my hull Jonathan Indigo 35-III _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2221 / Virus Database: 2629/5401 - Release Date: 11/17/12 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
