West sells it. Something like Un5200. Joel Aronson
On Nov 10, 2012, at 10:39 AM, Gary Nylander <gnylan...@atlanticbb.net> wrote: > There's a product which un-glues 5200. If interested, I can go to the boat > (five minutes away) and get the name. > > Gary > ----- Original Message ----- From: "Graham Collins" > <cnclistforw...@hotmail.com> > To: <cnc-list@cnc-list.com> > Sent: Friday, November 09, 2012 7:04 PM > Subject: Re: Stus-List deck hatch leak > > >> Sounds like someone got busy with 5200... >> >> See if you can work a box cutter knife blade in, if you can then work it >> around gradually, while keeping upward pressure on the frame. >> >> Another trick is to get a steel wire in - like a guitar string. And then >> work it around the perimeter. >> >> Graham Collins >> Secret Plans >> C&C 35-III #11 >> >> >> LKL Architects wrote: >>> >>> Trying to lift the hatch off the deck, will not budge and do not want to >>> force and ruin the gel coat. Any ideas on what the bedding might be and >>> how to break the bond. Appreciate any ideas. >>> >>> Lloyd Lippe >>> >>> Finesse >>> >>> 85 Landfall 39 >>> >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com