Jonathan:
Contact this guy for parts or maybe even get a price from him on a
refurbish of your hatch....he used to work for A&H for many years....his
prices are better than A&H.
Gurdial Singh Channa
Hammerhead Nautical System
71 Storey Pl
MARKHAM ON L3S 3B4
www.hhns.ca
Gurdial Singh Channa
Hammerhead Nautical Systems
www.hhns.ca
1-877-767-0222 toll free
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2012/09/20 12:32 PM, Joel Aronson wrote:
Jonathan,
It is a do-it-yourself project even for someone like me. You can
order the parts from A&H. Luckily, it seems like everything is
available. The gasket is 1/2" round foam and is held in with
silicone. You can probably buy it cheaper from McMaster or a similar
vendor.
The hatch lid is held in with the long pin. Just remember how the
springs are positioned and tap it out with a mallet or hammer.
Joel
35/3
The Office
Annapolis
On Thu, Sep 20, 2012 at 11:21 AM, Jonathan Reed <reedj...@me.com
<mailto:reedj...@me.com>> wrote:
Hi,
I bought a C+C 38 MK1, 1976, this summer and I think the forward
hatch needs refurbishing. It looks like an Atkins and Hoyle Hatch
and it would need new gasket, handle assemblies, etc . . . has
anyone done this work? Can I do it myself or should I send hatch
back to A+H. Would rather not pull hatch if I don't have to.
Thanks
Jon Reed
C&C 38 "Quicksilver"
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
--
Joel
301 541 8551
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
