Inside work now hooking things up I've become a much more patient person this summer. A truly Zen-like attitude. Grrrr...
Rich On 2012-09-19, at 10:22, "Hoyt, Mike" <mike.h...@impgroup.com> wrote: ... And now its going to rain for the next 40 days and nights! Good time to have a boat -----Original Message----- From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles Sent: Wednesday, September 19, 2012 9:24 AM To: cnc-list Cnc-List Subject: Stus-List Engine saga - It's Back! I got my Yanmar 3QM engine back from the rebuilders and into the boat yesterday. They were unable to determine the precise cause of the blow by that caused the oil evacuation. Might have been stuck rings. In any event, they installed new piston assemblies, cylinder liners, bearings and exhaust valves. It took them 3 hours to remove the injector I was unable to when I tried two years ago. In short, I should have a fine "new" engine once I bolt it in place and hook everything up. Total cost: about $4,500 not counting my R&R labour. Rich Knowles Indigo - LF38 Halifax. NS _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
