Bill,

The reference is indeed 'Sea Wolf'. And of all the literary and real
sailors to be compared to, Wolf Larsen would not have been my first
choice!

:-)

Cheers
Colin



On 8/9/12, Bill Coleman <colt...@verizon.net> wrote:
> That harkens me back to my Hornblower book days.  Or was it Sea Wolf by
> Jack
> London?  The new recruits always had  "hands like a lydys' with no
> calluses.
> Well, now I have hands like a lydys, and I burnt the dickens out of my
> fingers letting the main halyard fly a month ago, wish I had had gloves on
> then - or rather, I wish I had either put a couple turns around the winch
> or
> not tried to grip that which I could not.  Can't fix stupid.
>
> I have some gloves that are cut lower too, and they are just not real
> sailing gloves, just some type of work gloves that are available cheaper,
> but just not up to the task, think I will take them off the boat before
> someone burns a finger on them as well.
>
>
> Bill Coleman
> C&C 39
>
>
> -----Original Message-----
> From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
> On Behalf Of Colin Kilgour
> Sent: Thursday, August 09, 2012 4:49 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Sailing gloves
>
> I'm not convinced that size matters.  I think I have the biggest boat
> on the list... and I never wear gloves (unless they're winter gloves
> for warmth)
>
> When I was a kid racing Lasers, I'd go through a pair every few weeks
> it seemed, so I finally just decided to toughen up my hands and save
> some dough in the process.  I never looked back.
>
> I think it's a matter of personal preference, but I'd rather put up
> with the odd cut or blister than have to wear gloves all the time.
>
> Also, if you're a 'glove wearer' and you forget or lose your gloves
> one day, you're pooched because your virgin hands are going to get
> shredded.  By comparison, I almost never forget my hands.
>
> Of course, I take the same approach to shoes on board as well.  There
> are very few instances where I'll see the need to put shoes on - a
> crappy (slippery) deck, absence of toe rails, low life lines, etc.
> But absent that, I get a fine grip with bare feet.
>
> Cheers
> Colin
>
>
>
> On 8/9/12, Walt Dickie <wa...@crresearch.com> wrote:
>> Just went from gloves with all fingertips exposed to gloves with just the
>> index finger exposed. Raced last night and got a finger burn!
>>
>> From: cnc-list-boun...@cnc-list.com
>> [mailto:cnc-list-boun...@cnc-list.com]
>> On Behalf Of Marek Dziedzic
>> Sent: Thursday, August 09, 2012 11:31 AM
>> To: cnc-list@cnc-list.com
>> Subject: Re: Stus-List Sailing gloves
>>
>> I know people who sail without gloves; I can't.
>>
>> I used Ronstan's that lasted the longest (but I was sailing less then).
>> Gills last a season at best (though, they are quite comfortable). I have
>> quite good experience with West marine - they were, so far, the best
>> value
>> for the money (I bought a couple of pairs when they were at $20 (CAD!)).
>>
>> I also find that the same gloves differ in performance between pairs.
>> This
>> must depend on the leather and other materials sued in manufacturing.
>>
>> I also noticed that it pays to check in what state the gloves are
>> _before_
>> you put them to the test. Wearing gloves and being burnt by the moving
> line
>> is not overly enjoyable.
>>
>> My experience with any work gloves (Home Depot or Canadian Tire) is that
>> they are quite good, as long as they are dry. If you get them wet, they
>> don't dry that quickly and become a nuisance.
>>
>> All of the above don't help much when it gets cold. We do our haul out in
>> late October and the weather Gods somehow always know about it and send
> cold
>> and wet our way (we have some rain or sleet 8 times out of 10). I once
> used
>> the waterproof gloves during the haul out and they worked quite well
> (lasted
>> till lunch). On the other hand these gloves are not very conducive to
> doing
>> any precise work.
>>
>> When you combine wet and cold you maybe looking at some high performance
>> gloves (which means high price, as well). For skiing I always use Auclair
>> gloves (the racing kind, leather), but most of the time they don't need
>> to
>> cope with real wet (we usually ski way below 0C).
>>
>> Btw. I wonder what people prefer: all fingers cut or just the two? My
>> experience is that if you use all cut fingers gloves, you will get burnt,
>> eventually.
>>
>> Marek
>> C&C 24 "Fennel"
>> Ottawa
>>
>
> --
> Sent from my mobile device
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>

-- 
Sent from my mobile device

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to