oops, make that:
modprobe aha152x io=0x340,irq=11
Hendrik Schaink wrote:
> I would try loading it with just portbase and irq, since the rest of the
> settings may be determined by interrogating the card. i.e.:
> modprobe io=0x340 irq=11
>
> Use the command "modinfo aha152x" for the full details for aha152x.
>
> HTH,
>
> Hendrik Schaink
>
>
> Nick W wrote:
>
>>Hi all,
>>
>>I have a SCSI card (adaptec 1530p) which is not co-operating.
>>
>>I booted with TomsRtBt (2.2 kernel) and it autodetected the card with:
>>PORTBASE=0x340 IRQ=11 SCSI ID=7 reconnect=1 parity=1 synchronous=1 delay=100
>>extended traslation=0
>>
>>The module is aha152x, so I tried:
>>
>>$aha152x aha152x=0x340,11,7,1,1,1,100,0
>>
>>dmesg reported:
>>Unsupported module. Tainting kernel.
>>aha152x: invalid parameters io=0x340, irq=11, scsi=7, recon=1, parity=1,
>>sync=1, delay=100, extr=0
>>
>>I tried it with:
>>Mandrake 10.0, Suse 9.3pro, SLES 9, RHEL4, Knoppix 3.9
>>
>>Any ideas?
>>
>>_______________________________________________
>>clug-talk mailing list
>>[email protected]
>>http://clug.ca/mailman/listinfo/clug-talk_clug.ca
>>Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
>>**Please remove these lines when replying
>
>
--
Hendrik M. Schaink
Chief Consultant
"Integrated Business Solutions & Dependable Service"
InfoVision Consulting
Calgary, Alberta, Canada
Phone: (403) 239-0099
"The Vision: We are the partners of choice for companies and
organizations that share our commitment to creating a world
that is truly wise, courageous, prosperous, innovative,
inclusive, sustainable and humane." --Ruben Nelson
GPG Fingerprint: 1371 0927 8C3C 831F A838 C312 68BC F5DB 010D F3D7
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
