I would try loading it with just portbase and irq, since the rest of the
settings may be determined by interrogating the card. i.e.:
modprobe io=0x340 irq=11
Use the command "modinfo aha152x" for the full details for aha152x.
HTH,
Hendrik Schaink
Nick W wrote:
> Hi all,
>
> I have a SCSI card (adaptec 1530p) which is not co-operating.
>
> I booted with TomsRtBt (2.2 kernel) and it autodetected the card with:
> PORTBASE=0x340 IRQ=11 SCSI ID=7 reconnect=1 parity=1 synchronous=1 delay=100
> extended traslation=0
>
> The module is aha152x, so I tried:
>
> $aha152x aha152x=0x340,11,7,1,1,1,100,0
>
> dmesg reported:
> Unsupported module. Tainting kernel.
> aha152x: invalid parameters io=0x340, irq=11, scsi=7, recon=1, parity=1,
> sync=1, delay=100, extr=0
>
> I tried it with:
> Mandrake 10.0, Suse 9.3pro, SLES 9, RHEL4, Knoppix 3.9
>
> Any ideas?
>
> _______________________________________________
> clug-talk mailing list
> [email protected]
> http://clug.ca/mailman/listinfo/clug-talk_clug.ca
> Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
> **Please remove these lines when replying
--
Hendrik M. Schaink
Chief Consultant
"Integrated Business Solutions & Dependable Service"
InfoVision Consulting
Calgary, Alberta, Canada
Phone: (403) 239-0099
"The Vision: We are the partners of choice for companies and
organizations that share our commitment to creating a world
that is truly wise, courageous, prosperous, innovative,
inclusive, sustainable and humane." --Ruben Nelson
GPG Fingerprint: 1371 0927 8C3C 831F A838 C312 68BC F5DB 010D F3D7
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
