Scott Mohnkern wrote: > I recently put .95 on an Ubuntu box, and ExcludePath in clamd.conf doesn't > seem to be working right. > > Here's the lines from /usr/local/etc/clamd.conf for the ExcludePath > > ExcludePath ^/proc/ > ExcludePath ^/sys/ > ExcludePath ^//sys/ > ExcludePath ^/tmp/ > > > I realized that there was some question about whether two //'s or one in the > configuration file in previous versions, so I did one of each. > > > Then I typed: > > sudo clamd --config-file=/usr/local/etc/clamd.conf > > > to make sure it was pointing at the right configuration file. > > Then I typed: > > sudo clamdscan /sys > > As a test. I'd expect since /sys is specifically excluded, that it would > not scan anything, however, it attempted to scan /sys (and ran into > problems). > > > Has anyone else seen this symptom? > > > Scott > >
https://wwws.clamav.net/bugzilla/show_bug.cgi?id=1263 I thought this was going to get fixed in 0.95 - It was brought up here in February. I take it you're using a 0.95 RC version? Try using "^//" only and not both "^//" and "^?". dp _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
