Thanks Guys!!!
It’s showing up as disk2: using a 4G USB Key formatted as FAT32
Works on 9906 running 6.3.2 64-bit, 6.5.3 64-bit
Going to try installing the software via a USB key next week. Right now it’s
taking about 1 ½ Hours to upload the 1.3G iso’s using http download.
Painfully slow. And don’t let your session timeout.
RP/0/RSP0/CPU0:CR2.DAL1#sh log | i usb
Wed May 15 21:27:47.486 UTC
RP/0/RSP0/CPU0:May 15 21:13:50.304 UTC: usb_disk[69610]: %OS-SYSLOG-6-LOG_INFO
: mounted device to /disk2:
RP/0/RSP0/CPU0:May 15 21:18:50.347 UTC: usb_disk[66997]: %OS-SYSLOG-6-LOG_INFO
: disk removed /disk2:
RP/0/RSP0/CPU0:May 15 21:18:50.615 UTC: usb_disk[67016]: %OS-SYSLOG-6-LOG_INFO
: disk removed
RP/0/RSP0/CPU0:May 15 21:20:46.362 UTC: usb_disk[67216]: %OS-SYSLOG-6-LOG_INFO
: mounted device to /disk2:
RP/0/RSP0/CPU0:CR2.DAL1#show filesystem
Wed May 15 21:15:59.776 UTC
File Systems:
Size(b) Free(b) Type Flags Prefixes
1014255616 1003970560 flash-disk rw disk0:
0 0 network rw tftp:
491065344 489840640 flash rw /misc/config
3561914368 3555708928 harddisk rw harddiska:
4073914368 2378563584 flash-disk rw disk2:
3561914368 3555708928 harddisk rw harddiskb:
2513158144 2449240064 flash-disk rw apphost:
5814747136 5796179968 harddisk rw harddisk:
0 0 network rw ftp:
RP/0/RSP0/CPU0:CR2.DAL1#dir disk2:
Wed May 15 21:16:06.655 UTC
Directory of disk2:
6 drwxr-xr-x 2 4096 May 3 18:32 System\ Volume\ Information
7 -rwxr-xr-x 1 106444800 May 2 23:15 ASR9K-x64-iosxr-px-k9-6.5.3.tar
8 -rwxr-xr-x 1 1588887552 Apr 23 11:43 asr9k-mini-x64-6.5.3.iso
3978432 kbytes total (2322816 kbytes free)
RP/0/RSP0/CPU0:CR2.DAL1#run
Wed May 15 21:16:09.650 UTC
[xr-vm_node0_RSP0_CPU0:~]$mount | grep usb
/dev/vdd on /eusb type ext2 (rw,relatime,sync,errors=continue,user_xattr,acl)
/dev/vdg on /mnt/usb/vdg type vfat
(rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
[xr-vm_node0_RSP0_CPU0:~]$ls /mnt/usb/vdg
ASR9K-x64-iosxr-px-k9-6.5.3.tar System Volume Information
asr9k-mini-x64-6.5.3.iso
From: Peter Bruno <[email protected]>
Sent: Wednesday, May 15, 2019 2:11 PM
To: Bryan Holloway <[email protected]>
Cc: Erik Sundberg <[email protected]>; [email protected]
Subject: Re: [c-nsp] ASR9900 - Copy files from USB key
If you do a "dir ?" it should show you the possabilities... often "usb0:". The
size of the usb stick matters sometimes. Try a small < 8G stick.
Peter
On Wed, May 15, 2019 at 1:36 PM Bryan Holloway
<[email protected]<mailto:[email protected]>> wrote:
On 5/15/19 4:53 AM, Erik Sundberg wrote:
> Has anyone been able to install\copy software images from a USB key to a
> ASR9906. It take for ever to copy files from a http server, I would like to
> try from a USB key to see if it's faster.
>
> The router never recognizes the usb key when it put into the rsp. The Cisco
> Linux (Admin VM) also does not recognize it either.
>
> I am specifically running a Cisco ASR9906 with A99-RSP-SE 6.3.3 (32-bit). I
> am Upgrading to 6.3.3 64-bit then to 6.5.3 (64 bit) the current process take
> 3-4 hours.
>
>
> Thanks
>
> Erik
I've definitely copied files from a USB stick onto an ASR9001, so I
can't imagine why you wouldn't be able to on a 990x platform. Pretty
sure I did it on a 9006 with RP880s, but it's been awhile.
The trick is usually figuring out the correct device name. In my travels
I've seen "usb:", "disk2:" ... ymmv.
_______________________________________________
cisco-nsp mailing list
[email protected]<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Thank you,
Peter Bruno
609.335.6887 c
________________________________
CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or
previous e-mail messages attached to it may contain confidential information
that is legally privileged. If you are not the intended recipient, or a person
responsible for delivering it to the intended recipient, you are hereby
notified that any disclosure, copying, distribution or use of any of the
information contained in or attached to this transmission is STRICTLY
PROHIBITED. If you have received this transmission in error please notify the
sender immediately by replying to this e-mail. You must destroy the original
transmission and its attachments without reading or saving in any manner. Thank
you.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
