On 5/15/19 4:53 AM, Erik Sundberg wrote:
Has anyone been able to install\copy software images from a USB key to a ASR9906. It take for ever to copy files from a http server, I would like to try from a USB key to see if it's faster. The router never recognizes the usb key when it put into the rsp. The Cisco Linux (Admin VM) also does not recognize it either. I am specifically running a Cisco ASR9906 with A99-RSP-SE 6.3.3 (32-bit). I am Upgrading to 6.3.3 64-bit then to 6.5.3 (64 bit) the current process take 3-4 hours. Thanks Erik
I've definitely copied files from a USB stick onto an ASR9001, so I can't imagine why you wouldn't be able to on a 990x platform. Pretty sure I did it on a 9006 with RP880s, but it's been awhile.
The trick is usually figuring out the correct device name. In my travels I've seen "usb:", "disk2:" ... ymmv.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
