I'm 99.9999% positive there is no way to make an outbound connection from a console port. It's been a while since I've worked on that stuff though.
On Fri, May 18, 2018 at 2:04 AM, Patrick M. Hausen <[email protected]> wrote: > Hi! > > > Am 18.05.2018 um 09:00 schrieb joshd <[email protected]>: > > If the good cat6500 had an aux port, you could go from aux->con of the > bad switch....but I don't think cat6500s have an aux port. > > Precisely - the VS-S720-10G doesn't have an aux port. > The question is if I can use the con port in the same fashion and > if yes, how? > > Patrick > -- > punkt.de GmbH Internet - Dienstleistungen - Beratung > Kaiserallee 13a Tel.: 0721 9109-0 Fax: -100 > 76133 Karlsruhe [email protected] http://punkt.de > AG Mannheim 108285 Gf: Juergen Egeling > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
