*bump* was never posted. From: Mark Mason Sent: Tuesday, May 9, 2017 12:29 PM To: '[email protected]' <[email protected]> Subject: Cisco ASR vs Juniper
Alright crowd...Ready the rifles and prepare for battle...Cisco ASR or Juniper. Cost, operability, chassis lifespan new vs. old, memory requirements, etc. So many details. Feel free to take the post anywhere you'd like. Deployments: EDGE Pure internet router/edge with single eBGP toward ISP - 10Gb up to ISP and 10Gb down to Aggregation Point MX10 w/ licensing get me 4x10Gb (but sys cap. At 20Gb?), MX40 vs ASR1001X (or ASR1001-HX) +pretty vanilla installation +not running security at this level +just a router doing routing +single eBGP so/so on memory requirements +single iBGP down to Core/Agg AGGREGATION Internet Edge Aggregation/multiple iBGP sessions toward edge routers MX104 or MX240 (or greater chassis lineup) vs ASR9k +HUGE MEMORY requirements +Multiple BGP aggregation feeds +Installation of best routes from MULTIPLE carriers NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
