Hi, With the ISM cards we used to run 4 set of VRFs (and 4 sets of SA interfaces) to achieve full throughput of the card for NAT. We're upgrading to VSM cards now, but I'm unable to determine if they also need a similar split of traffic or not. I seem to recall that they should be able to do about 60Gb/s of throughput and apparently the traffic needs to be split into two pairs of SA interfaces to achieve that, but really can't find a source of that information.
My google fu is failing me today, but perhaps someone can point me to the relevant document or share some experience. Thx, Kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
