Hello Marco, can you show "Ip ospf interface" on both sides? 11 Дек 2014 г. 4:47 пользователь "Мурат Каипов" <[email protected]> написал:
> Looks pretty good. Does ospf neighbor come up? > 11 Дек 2014 г. 3:27 пользователь "FF" <[email protected]> написал: > >> >> Just a guess, try making sure mpls ip is either enabled or disabled on >> both ports. g0/24 does not have it enabled, so I'm pretty sure your mpls >> ldp won't be up either. >> >> On Wed, Dec 10, 2014 at 6:36 AM, Marco Marzetti <[email protected]> >> wrote: >> >>> On 09/12/2014 20:39, Murat Kaipov wrote: >>> >>>> Hello Marco. >>>> Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload, >>>> and >>>> all BFD packets processed by CPU. >>>> http://www.cisco.com/c/en/us/td/docs/switches/metro/ >>>> me3600x_3800x/software/r >>>> elease/15-4_1_S/chassis/configuration/guide/3600x_24cxscg/swbfd.pdf >>>> Show configuration on both sides please. >>>> >>>> >>> >>> Hello Murat, >>> >>> I'm well aware of the hardware offload limit. >>> But cisco brought it to ME-3600X-24CX and I *HOPE* they will do the same >>> with the other platforms in future. >>> >>> Anyway you can find the configuration below >>> >>> **** C6500_1 **** >>> ! >>> router ospf 1 >>> router-id 192.0.2.52 >>> auto-cost reference-bandwidth 10000 >>> redistribute connected subnets >>> bfd all-interfaces >>> mpls ldp sync >>> ! >>> interface GigabitEthernet2/7 >>> mtu 9216 >>> ip address 192.0.2.174 255.255.255.252 >>> ip ospf authentication message-digest >>> ip ospf message-digest-key 1 md5 7 *HIDDEN* >>> ip ospf network point-to-point >>> ip ospf 1 area 0 >>> udld port disable >>> mls qos trust dscp >>> mpls ip >>> bfd interval 300 min_rx 300 multiplier 3 >>> ! >>> >>> >>> **** ME3600X **** >>> ! >>> platform bfd allow-svi >>> ! >>> bfd-template single-hop bfd-core >>> interval min-tx 300 min-rx 300 multiplier 3 >>> ! >>> router ospf 1 >>> router-id 192.0.2.19 >>> auto-cost reference-bandwidth 10000 >>> redistribute connected subnets >>> redistribute static subnets >>> bfd all-interfaces >>> mpls ldp sync >>> mpls ldp autoconfig area 0 >>> ! >>> interface GigabitEthernet0/24 >>> no switchport >>> mtu 9216 >>> ip address 192.0.2.173 255.255.255.252 >>> ip ospf authentication message-digest >>> ip ospf message-digest-key 1 md5 7 *HIDDEN* >>> ip ospf network point-to-point >>> ip ospf 1 area 0 >>> udld port disable >>> bfd template bfd-core >>> >>> ! >>> >>> Thank you >>> >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >> >> >> >> -- >> FF >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
