Looks pretty good. Does ospf neighbor come up? 11 Дек 2014 г. 3:27 пользователь "FF" <[email protected]> написал:
> > Just a guess, try making sure mpls ip is either enabled or disabled on > both ports. g0/24 does not have it enabled, so I'm pretty sure your mpls > ldp won't be up either. > > On Wed, Dec 10, 2014 at 6:36 AM, Marco Marzetti <[email protected]> wrote: > >> On 09/12/2014 20:39, Murat Kaipov wrote: >> >>> Hello Marco. >>> Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload, >>> and >>> all BFD packets processed by CPU. >>> http://www.cisco.com/c/en/us/td/docs/switches/metro/ >>> me3600x_3800x/software/r >>> elease/15-4_1_S/chassis/configuration/guide/3600x_24cxscg/swbfd.pdf >>> Show configuration on both sides please. >>> >>> >> >> Hello Murat, >> >> I'm well aware of the hardware offload limit. >> But cisco brought it to ME-3600X-24CX and I *HOPE* they will do the same >> with the other platforms in future. >> >> Anyway you can find the configuration below >> >> **** C6500_1 **** >> ! >> router ospf 1 >> router-id 192.0.2.52 >> auto-cost reference-bandwidth 10000 >> redistribute connected subnets >> bfd all-interfaces >> mpls ldp sync >> ! >> interface GigabitEthernet2/7 >> mtu 9216 >> ip address 192.0.2.174 255.255.255.252 >> ip ospf authentication message-digest >> ip ospf message-digest-key 1 md5 7 *HIDDEN* >> ip ospf network point-to-point >> ip ospf 1 area 0 >> udld port disable >> mls qos trust dscp >> mpls ip >> bfd interval 300 min_rx 300 multiplier 3 >> ! >> >> >> **** ME3600X **** >> ! >> platform bfd allow-svi >> ! >> bfd-template single-hop bfd-core >> interval min-tx 300 min-rx 300 multiplier 3 >> ! >> router ospf 1 >> router-id 192.0.2.19 >> auto-cost reference-bandwidth 10000 >> redistribute connected subnets >> redistribute static subnets >> bfd all-interfaces >> mpls ldp sync >> mpls ldp autoconfig area 0 >> ! >> interface GigabitEthernet0/24 >> no switchport >> mtu 9216 >> ip address 192.0.2.173 255.255.255.252 >> ip ospf authentication message-digest >> ip ospf message-digest-key 1 md5 7 *HIDDEN* >> ip ospf network point-to-point >> ip ospf 1 area 0 >> udld port disable >> bfd template bfd-core >> >> ! >> >> Thank you >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > > -- > FF > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
