Cheers. Any other "tweaks" to default config you recommend? i.e. timers etc?
> From: [email protected] > To: [email protected] > Date: Fri, 19 Sep 2014 00:42:23 +0000 > Subject: Re: [c-nsp] next-hop-self under address-family vpnv4 also? > > It¹s not needed. > > > "address-family vpnv4" section is used to define which routers participate > in the VPNv4. The underlying MPLS network will forward labels between the > VPNv4 end-point CE's. Next-hop-self isn¹t required. All that¹s required is > MPLS and IGP reachability between the CE¹s participating in the vpnv4 > domain. > > On 19/09/2014 10:31 am, "CiscoNSP List" <[email protected]> wrote: > > >Is it recommended to add it under vpnv4 also? > > > >i.e. > > > >router bgp xxxxxx > >... > >neighbor iBGP-IPv4-PEERS update-source Loopback0 > >neighbor iBGP-IPv4-PEERS next-hop-self > >neighbor xxx.xxx.xxx.xxx peer-group iBGP-IPv4-PEERS... > >address-family vpnv4 > > bgp redistribute-internal > > neighbor iBGP-IPv4-PEERS send-community extended > > neighbor iBGP-IPv4-PEERS next-hop-self > > neighbor xxx.xxx.xxx.xxx activate > > > >Cheers. > > > > > > > >_______________________________________________ > >cisco-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/cisco-nsp > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
