You should just be able to pull it out...I don't think there's a tab since it's held in place with the two screws. I don't remember any tabs on the ones I've removed.
On Thu, Sep 11, 2014 at 7:54 AM, Scott Granados <[email protected]> wrote: > Carefully as apposed to what, recklessly press the tab with a hammer? > > ;) > > On Sep 11, 2014, at 10:12 AM, Drew Weaver <[email protected]> wrote: > >> In the instructions for removing a network module from a 3560x it states >> 'carefully press the tab on the right side of the module'. >> >> I can't seem to locate a tab on the NM-10G which releases it from the slot. >> >> Is it under the mounting bracket? Under the faceplate? Is anyone aware of >> where this mythical tab resides? >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
