On Wed, 27 Aug 2014, Mohammad Khalil wrote:
I have old Cisco VXR I need to access with console , but it's not RJ45 console , it's like the computer ports is there a specific cable to use?
What NPE does the VXR have? If it has an NPE-G1 or G2, there should be an RJ45 console port on the back, on the NPE itself. The serial I/O module on the front is not needed with the G1 or G2 (if I remember correctly). Older NPEs (NPE-400 / NSE-1, I think) don't have console ports on the processor blade, so the front I/O module is needed. If that's the case, then you need the DB25 DCE to RJ45 connector. What you need beyond that depends on how you are connecting to the VXR's console (computer or going through a terminal server).
jms _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
