I am trying to configure an interface on a ME3600 to accept Q in Q from a provider. The p-vlan the provider is using is 1048 and they are carrying customer vlans (c-vlan) 1058-1098, one from each site. I'm new to the 3600 and have not done Q in Q on it yet. I've worked up this much of the config but it does not seem right. Can anyone give me some pointers or links to help me along ? I've only got one customer site configed, there will be 14.
! vlan 1048 name WINDSTREAM ! vlan 1058 name WINDSTREAM-HOBBS ! interface GigabitEthernet0/6 description Windstream VLS IP.LVXX.xxxxxx..WCI.001 port-type nni switchport trunk allowed vlan none switchport mode trunk service instance 10 ethernet encapsulation dot1q 1048 rewrite ingress tag pop 1 symmetric bridge-domain 10 ! ! interface Vlan1048 description Windstream VLS no ip address ! interface Vlan1058 description WINDSTREAM-HOBBS ip address xxx.xx.xx.1 255.255.255.0 Thanks, James _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
