On 7/25/2014 12:30 AM, Righa Shake wrote:
Hello,
I am getting the following error on a Cisco 2901 router.
*Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 0/0/1 Not initialized due to insufficient DSP resources
*Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP:
voice-port : 0/0/2 Not initialized due to insufficient DSP resources
System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M6.bin"
The FXS Voice Card is visible.
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FCZ1816C32P
2 Gigabit Ethernet interfaces
1 terminal line
2 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
255488K bytes of ATA System CompactFlash 0 (Read/Write)
What PVDMs do you have installed in the router?
Any TDM interfaces require a PVDM to do the DA/AD conversions
(FXO/FXS/T1/etc)
Jeremy "TheBrez" Bresley
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
