Hello, I am getting the following error on a Cisco 2901 router.
*Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP: voice-port : 0/0/1 Not initialized due to insufficient DSP resources *Jul 23 12:27:57.167: %DSPRM-3-INSUFFICIENT_DSP: voice-port : 0/0/2 Not initialized due to insufficient DSP resources System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M6.bin" The FXS Voice Card is visible. Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory. Processor board ID FCZ1816C32P 2 Gigabit Ethernet interfaces 1 terminal line 2 Voice FXS interfaces DRAM configuration is 64 bits wide with parity enabled. 255K bytes of non-volatile configuration memory. 255488K bytes of ATA System CompactFlash 0 (Read/Write) Regards, Righa _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
