You need to have spares before doing any major changes to your network. Virtually all Cisco Products are affected by this issue:
http://www.cisco.com/web/about/doing_business/memory.html#~field The problem is that if you order via RMA several similar parts, you may get this: "As we do not normally support proactive RMA, we are contacting our planning team for further instruction."... Then they will tell you "Fix on Failure". Not easy to handle... Regards, Antonio Soares, CCIE #18473 (RS/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Jon Lewis Sent: segunda-feira, 30 de Junho de 2014 15:12 To: [email protected] Subject: [c-nsp] "Cisco'€™s Commitment to Customers" I'm currently dealing with TAC on the failure of a WS-6708 that I believe is connected with the defective memory component issue talked about here: http://blogs.cisco.com/news/ciscos-commitment-to-customers/ i.e. it was working fine...the router was rebooted, after which, the card no longer passes boot-up diagnostics. This passage: Despite many of these products being out of warranty, Cisco has decided to take a charge of $655m related to the expected cost of managing these issues. We are taking this action to support our customers and partners. This charge was excluded from our non-GAAP financials, as we do not believe it is reflective of ongoing business and operating results. implies to me that Cisco plans to replace such cards regardless of smartnet coverage. I thought I was about to get a replacement shipped out when the TAC rep sent this: I couldn't find any valid contract for RMA based on serial number of module 8, can you please provide contract number for the RMA so that I can proceed further. So, what's the real deal with these time-bomb cards? Will cisco replace them as they fail, or only if they're covered by a current smartnet contract? If the latter, what was the point of the blog post? In the comments and responses to comments, Curtis has been evasive when asked what cisco will do for people with affected products and no smartnet coverage. I've got a number of 6500s that need reloads to change the v4/v6 routing split, and after seeing a 6708 fail in each of the last two 6500s I've reloaded, I'm not feeling really good about proceeding. ---------------------------------------------------------------------- Jon Lewis, MCP :) | I route | therefore you are _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
