Thanks Pete. Do you know if any of the other tunnelling modes are supported?
ipip IP over IP encapsulation ipsec IPSec tunnel encapsulation ipv6 Generic packet tunneling in IPv6 ipv6ip IPv6 over IP encapsulation Thanks Ivan > GRE is not supported on the ASR901. > > > On Mon, May 12, 2014 at 5:59 AM, Ivan <[email protected]> wrote: > >> I have some Cisco ASR901s and would like to have a layer 2 or layer 3 >> tunnel between them over a layer 3 network. >> >> I have configured GRE and tunnel is up and it is possible to ping the >> remote ends. All looks good from the control plane side but I am not >> having success with traffic being forwarded. >> >> Although I have been able to configure this as far as I can tell there >> is >> nothing in the doco for this. I am thinking it maybe one of those "you >> can configure but not supported" things. >> >> Can anyone confirm if GRE tunnels or similar are actually supported? >> >> Hardware: ASR 901 >> Software: 15.4(1)S1 >> License Level: IPBase >> >> Thanks >> >> Ivan >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
