What I'm randomly encountering is the port forward will stop working,
and I have to remove and re-add the line:
ip nat source static tcp 192.168.1.3 3389 interface Dialer1 3389
I had the same issue with an 831, my line is:
ip nat inside source static tcp <inside private IP> 5900 interface
Ethernet1 5900
but my eth1 has a static (public) IP.
I had to remove and reapply the line every now and then, as you
describe. I don't remember the version that had the issue, but it
disappeared with the upgrade to 12.3(11)YZ2.
Hope thie helps,
Bergonz
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
