Hi,
>> should work fine. Manually set the interface media type on both sides to >> be rj-45, and make sure that the cable is a cross-over gigabit: > > I wonder. Shouldn't this never be needed for Copper Gbit? Its correct that GigabitEthernet mandates autoneg, and it is also correct that "mdix auto" REQUIRES autoneg, but afaik that doesn't mean all your gigabit/autoneg gear can also automatically do auto-mdix, because that probably requires different hardware (switching RX/TX). Regards, Lukas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
