No auto-mdix on npe-g1 so use a crossover Thanks Darren http://www.mellowd.co.uk/ccie
> To: [email protected] > From: [email protected] > Date: Wed, 19 Mar 2014 09:39:29 -0400 > CC: [email protected] > Subject: [c-nsp] NPE-G1s don't want to talk to each other over copper? > > > Hi folks, > > I have a small pile of NPE-G1s here, about to upgrade the routing > engines in the VXRs in $BROCOLO in an effort to eke out a couple of > more years from them. > > So, I'm staging and made an interesting discovery: over the built-in > rj45 connectors they will talk to a switch (ex3200) but when cabled to > each other link will not come up. Haven't tried a crossover cable to > see if they'll come up at 100m rather than gigabit, but this is > puzzling to me. > > Tried 12.4 mainline and 15.x. Upgraded the bootloader. No joy. > > Anyone have any ideas or is this a known shortcoming? > > Thanks, > > -r > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
