Hi Ali, First of all I'd try to get a L2 transparent circuit from the provider not just a single VLAN -might be available at the same price. If that's not an option than I'd try to double tag the frames on the uplink to the provider as follows: (Please check whether there's enough MTU on the uplink) interface GigabitEthernet0/13 mtu 1512 service instance 25 ethernet descript transport customer1 encapsulation dot1q 100 second-dot1q 10 rewrite ingress tag pop 2 symmetric bridge-domain 25 ! service instance 20 ethernet descript management encapsulation dot1q 100 second-dot1q 20 rewrite ingress tag pop 2 symmetric bridge-domain 20
interface vlan 20 descript switch management interface vrf for mgmt ip add 10.0.0.1 255.255.255.252 Interface GigabitEthernet0/19 port-type nni switchport trunk allowed vlan none switchport mode trunk mtu 1504 service instance 26 ethernet descript to customer1 encapsulation dot1q 200,433,472 bridge-domain 25 adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
