On Friday, January 10, 2014 09:37:03 PM Eric A Louie wrote: > Is there anything I need to watch out for, either > hardware-wise or software-wise when moving the > configuration? (other than the typical > nomenclature/interface designations and small > syntactical changes, that is)
The tricky things to consider are those that are tied to the hardware, like QoS features, QoS application to interfaces, LAG's, Netflow, e.t.c. > Any recommendations for code version on the ASR? I'd go with current code. > 7200VXR is running c7200-pk9u2-mz.124-25c IOS 12.2SRE or 15 are best for the 7200. > I'm probably turning the 7200VXR into a ibgp route > reflector - any opinions about that? Be sure to run it on an NPE-G2, and on IOS 15. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
