On Thu, 28 Nov 2013, Bill Blackford wrote:
My experience with Cisco IPv6 is limited but I believe you can't even configure a v6 address until you have the IPv6 SDM template loaded.
You don't need to have an IPv6 address on an L2 switch, to L2 switch 0x86dd ethertype frames.
-- Mikael Abrahamsson email: [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
