Do you still need to do that when it's a port-based pw? Sent from my iPhone
> On Nov 18, 2013, at 8:19 AM, Dimitris Befas <[email protected]> wrote: > > Hi Fredrik, > > Please check the command "l2protocol ?" under interface config. > > > 2013/11/18 Fredrik Vöcks <[email protected]> > >> Hi all, >> >> We are having a customer who says he can't forward BPDU packets over an >> portbased EoMPLS using an ASR 901. >> >> Is this something known or am I missing something? Relevant configuration; >> >> interface TenGigabitEthernet0/1 >> description c_customer433231 >> no keepalive >> xconnect x.x.x.x 1730 encapsulation mpls >> >> /F >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
