Thanks Oli. I made some changes, let me know what you think.... Is CIR 128k in this policy ? if so, then is this correct ?
128k = 128 * 1024 = 131,072 bps Then you mentioned default burst is 100ms worth of CIR... is this correct ? 100ms worth of CIR is 131,072 / 10 = 13,107.2 bits = 13,107.2 /8 = 1,638.4 bytes If this is all true why does it still show 1598 bytes instead of the new burst value of 1638 bytes ? RP/0/RSP0/CPU0:sv-b-9k-test1(config-pmap-c-police)#sh run policy-map policy1 Tue Sep 10 08:09:43.709 CDT policy-map policy1 class class-default police rate 128 kbps ! ! end-policy-map RP/0/RSP0/CPU0:sv-b-9k-test1(config-pmap-c-police)#do sh qos interface g0/0/0/10 o Tue Sep 10 08:12:01.057 CDT Interface: GigabitEthernet0_0_0_10 output Bandwidth configured: 1000000 kbps Bandwidth programed: 1000000 ANCP user configured: 0 kbps ANCP programed in HW: 0 kbps Port Shaper programed in HW: 0 kbps Policy: policy1 Total number of classes: 1 ---------------------------------------------------------------------- Level: 0 Policy: policy1 Class: class-default QueueID: 2 (Port Default) Policer Profile: 34 (Single) Conform: 128 kbps (128 kbps) Burst: 1598 bytes (0 Default) Child Policer Conform: TX Child Policer Exceed: DROP Child Policer Violate: DROP ---------------------------------------------------------------------- Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
