On Friday, September 06, 2013 08:14:53 AM CiscoNSP List wrote: > Thanks for the clarification - So RP1 will accept up to > available ram in RIB (What happens when it exceeds > available ram?),
Bad things can happen, like router reboots due to lack of memory for other processes, very slow BGP route processing, e.t.c. For those with fixed ASR1000 systems, don't enable the second IOSd software process, as you effectively lose half of the control plane memory. > and then FIB will accept up to 1M > prefixes(best path), which is currently ~460K....so on > an RP1 you have an additional ~500k of prefixes(IPv4) > that it will still accept? You'll need to consider other entries like IGP, MPLS, Multicast, e.t.c., if you have that. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
