You're mistaking FIB for RIB. RIB will take whatever fits in available memory, usually way more than 1M of IPv4 routes. FIB is limited to 1M prefixes, but only bestpaths land here, so with number of full feeds you'll usually anyway land at around 460k of prefixes. Try to search in archives for a lot of details.
-- ./ > On 6 wrz 2013, at 07:51, CiscoNSP List <[email protected]> wrote: > > > Another question on the ASR1000 :) > > RP1 supports 1M IPv4 routes i.e. ~2 full tables...If you bring on a third > full table, will you see rib failure (memory) for all routes that exceed 1M? > (Assume yes?) > > How is the rib allocation calculated? if you added(peered) 4 full tables > (sequentially, one after the other), would the bgp sessions after the 1st and > second be the ones that are rejected, and then it is based on route churn? > (So would routes from peer 3 and 4 be added during churn?) > > Cheers. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
