Hi Nick, What do you think about ..
ASR1001-2XOC3POS with 1 unit of SPA-2XT3/E3 *Best Regards,** ** Dipak Timsina Dristi Tech Pvt. Ltd. **Pulchowk | Lalitpur | Nepal M: +977 9801011407 | T: +977 1 5552070 www.dristi.com.np* On Sun, Jul 21, 2013 at 6:17 PM, Nick Hilliard <[email protected]> wrote: > On 21/07/2013 12:54, Bikash Bhattarai wrote: > > Please help me to find cisco router to meet below requirements. > > > > STM-1 interface -- 2 (should be upgradable) > > 1Gig SFP internface -- 2 (should be upgradable) > > DS3 interface - 2 > > Traffic 2 Gbps > > Bikash, > > You could get an asr1002x and plug in a 4-port STM1 SPA and a 2/4 port DS3 > SPA. > > The problem with this configuration is that once you add everything up, it > will turn out to be surprisingly expensive. I reckon would cost just under > $60k based on the cisco global US$ list price. Obviously, the retail price > would be a lot lower, but in my view this is still too expensive for a very > modest configuration. > > If I were in your position, I would look at a C7200vxr/NPE-G2 from ebay for > the stm1/ds3 requirements, and get an asr1001 for the gigabit ethernet > requirements, giving: > > - line rate gigabit ethernet at a reasonable cost > - enough capacity on the 7200 to give you line rate throughput on your > stm1/ds3 interfaces > - legacy interfaces are separated from your more modern interfaces > - significantly lower cost > > Nick > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
