On 21/07/2013 12:54, Bikash Bhattarai wrote: > Please help me to find cisco router to meet below requirements. > > STM-1 interface -- 2 (should be upgradable) > 1Gig SFP internface -- 2 (should be upgradable) > DS3 interface - 2 > Traffic 2 Gbps
Bikash, You could get an asr1002x and plug in a 4-port STM1 SPA and a 2/4 port DS3 SPA. The problem with this configuration is that once you add everything up, it will turn out to be surprisingly expensive. I reckon would cost just under $60k based on the cisco global US$ list price. Obviously, the retail price would be a lot lower, but in my view this is still too expensive for a very modest configuration. If I were in your position, I would look at a C7200vxr/NPE-G2 from ebay for the stm1/ds3 requirements, and get an asr1001 for the gigabit ethernet requirements, giving: - line rate gigabit ethernet at a reasonable cost - enough capacity on the 7200 to give you line rate throughput on your stm1/ds3 interfaces - legacy interfaces are separated from your more modern interfaces - significantly lower cost Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
