Hi,
Had this come up in a job I was just doing on the weekend on a 857w
running 12.4(6)T6 ADVSECURITYK9-M. Here is the config I have working
with it:
ip ddns update method domain_ddns
HTTP
add
http://xxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
!
interface Dialer1
ip ddns update hostname domain.ath.cx
ip ddns update domain_ddns
!
Couple of things to note, I had to clear the dialer to get it to update
and updates were a bit flakey till I added 'interval maximum 1 0 0 0'.
On 31/05/2011 4:59 AM, ccie wrote:
Debug ip ddns update
!Nothing
Unfortunately I can't help you with debug on this, worked first time for me.
ip ddns update method mytest
HTTP
add http://xxxxx:[email protected]/nic/update?system=dyndns
<http://xxxxx:[email protected]/nic/update?system=dyndns&hostname=%3ch
%3e&myip=%3ca> &hostname=<h>&myip=<a>
interval maximum 1 0 0 0
I am not sure if your client or mine has added some extra characters to
that add http line but it doesn't look right.
Regards,
James.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
