The POS looks like a standard 6500 layer 3 port with of course the added POS commands. This means standard MPLS commands should work. The older POS cards lack some of the functionality of the newer cards. Someone may have more information if you provide the exact line card.
Mack McBride Network Architect -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of FF Sent: Monday, May 23, 2011 9:25 PM To: [email protected] Subject: [c-nsp] OC-48 transport over Cisco 6500 If I'm trying to transport OC-48 between two customer locations via MPLS on a Cisco 6500... Would simple MPLS/xconnect work using the appropriate OC-48-OSM on each side? [i.e., will the OC-48-OSM look like a traditional SONET interface such as one would see from a 15454 or similar mux to the customer equipment?] thanks in advance, -- FF _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
