Hi, On Sat, 14 May 2011 12:30:16 +0100, Nick Hilliard <[email protected]> wrote:
> There is no "correct" answer to this question. It depends completely on > your traffic profile. Probably the default ospf settings will do a > reasonable job of handling this situation. And given that it's only 11 > devices, there's no reason not to have them all in the same ospf area. > > Other than that, you need to keep as few prefixes as possible in your IGP > (preferably only loopbacks, with everything else carried in ibgp). You Here it depends. If the next-hop changes OSPF will in most cases converge faster than BGP. So if there aren't that many routes and you can live with less policy possibilities I would prefer OSPF over BGP for carrying non-infrastructure networks. > should also probably drop the default hello/dead time from 10/40 seconds > to > something a lot lower (e.g. 1/4 seconds), unless some of your routers are > slow or busy. BFD, MPLS-FRR, SPF- and Flood-Tuning for even faster convergence. Cheers Christian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
