> Date: Tue, 9 Feb 2010 11:36:21 -0600 > From: Chris Wopat <[email protected]> > To: [email protected] > Subject: [c-nsp] 2811 login issues > > I have a 2811 that stopped accepting logins from its FastEthernet > interface last week out of the blue. When this happened there were no > config changes, router reboots, etc. It has a Multilink bundle > unnumbered via that FastEthernet interface and it *does* accept logins > from this direction. Config is simple, a default route via FA and a > /24 via MU.
Although no one replied I'd like to post the solution to this for the to potentially help anyone reading this in the future. The first few minutes the router is booted (all interfaces are up during this period): # sh ip route | inc 3.88 C 10.170.3.88/29 is directly connected, FastEthernet0/0 Then for some reason 5-10 minutes later it would change to: # sh ip route | inc 3.88 C 10.170.3.88/32 is directly connected, FastEthernet0/0 Numbering Mu1 fixed it. I still have no clue why this was happening but am content with it being fixed. I have even less of a clue as to why this just started happening out of the blue one day after being up for many months with no config changes, interface flaps or even user logins but am happy that it's working. --Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
