On Mon, Feb 8, 2010 at 11:00 AM, <[email protected]> wrote: > Subject: [c-nsp] 2811 login issues > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > I have a 2811 that stopped accepting logins from its FastEthernet > interface last week out of the blue. When this happened there were no > config changes, router reboots, etc. It has a Multilink bundle > unnumbered via that FastEthernet interface and it *does* accept logins > from this direction. Config is simple, a default route via FA and a > /24 via MU. > > A few other odd symptoms: > > - 'copy tftp flash' will work for about 12 seconds and then begin to timeout. > > - telnetting from the router to anywhere immediately gives > "Destination unreachable; gateway or host down" without even really > trying. > > What's even more strange is that everything works fine the first 5-10 > minutes after a reboot. > It was running 12.4(15)XY1 and I was able to get it to 12.4(15)XY3 to > see if it was a bug. It's running XY for support for its HWIC-4T1/E1. > > In an attempt to rule out an upstream routing problem I've added its > default gateway (3.89) to the login ACL and it gives the same symptoms > when connecting from there. It seems to be completely dropping packets > vs rejecting them as it still does if you connect from an IP not on > that ACL. > > 'debug ip packet' shows this when connecting via telnet or ssh: > > Feb 8 07:45:25.892 CDT: IP: s=10.170.8.18 (FastEthernet0/0), > d=10.170.3.90, len 60, rcvd 2 > Feb 8 07:45:25.892 CDT: IP: s=10.170.8.18 (FastEthernet0/0), > d=10.170.3.90, len 60, stop process pak for forus packet
Anyone have insight into this? I still have not come up with a solution. I've also temporarily enabled CDP to confirm that things are connected as they should be. --Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
