Can you paste in the full 'show int', my guess is you're getting input buffer failures (need to see the 'Input Queue' line in particular).
Ken Matlock Network Analyst Exempla Healthcare (303) 467-4671 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim Durack Sent: Friday, February 05, 2010 8:39 AM To: [email protected] Subject: [c-nsp] WS-X6748-SFP input errors Cisco 6509, SUP720, 12.2(33)SXI3, WS-X6748-SFP, port shows: sh int g1/9 | i error 3915 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 output errors, 0 collisions, 0 interface resets The other side is clean. What do input errors alone indicate? (Have tested/replaced fiber/SFPs, without success.) -- Tim:> Sent from Brooklyn, NY, United States _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
